FIR65° HEATING PAD KIT SERIES
FIR65° HEATING PAD KIT SERIES (PLUG AND USE)
Three (3) exothermal heating elements producing FIR (Far Infrared Ray) infrared radiation (Plug and Use Model).
One (1) adjustable Li-ion battery, model – LBP-744B: 4400mAh
One (1)100-240V battery charger, model – LBC-8412
Manual (if needed)
Three (3) exothermal heating elements, which produce FIR radiation (customization of the size is possible)
FIR radiation reaches a depth of 3-5 cm inside the body, warming and stimulating blood circulation, for example.
The battery can be recharged 400-500 times.
Infrared (IR) = the invisible part of the light spectrum
Exothermal heating element = a special carbon compound, which produces long-wave infrared radiation.
Use the heating elements with the ’face inward/FIR65″ text towards the body. Never keep the warm heating elements on top of each other for longer than 5 minutes.
Fully charge the battery before use (about 4 hrs)
The battery is charged in steps of 0-9, with 9 meaning a full battery.Connect the cable to the battery, press the ON/UP button to start the device and press the OFF/DOWN button and keep it depressed for about 2 seconds when you want to turn it off.
Temperature adjustment (1-5) takes place by pressing the ON/UP and OFF/DOWN buttons.
Once the desired temperature has been reached, a small dot blinks on the display for about 5 seconds, after which the display reverts to showing the level of battery charge.
Battery can also be switched off by disconnecting the cable from the battery. The battery will then turn itself off automatically.
Temperature display and operating time:
 – 30˚C approx. 21 hours
 – 35˚C approx. 14 hours
 – 40˚C approx. 10 hours
 – 50˚C approx. 8 hours
 – 60˚C approx. 6 hours
When ’E’ is displayed, the battery requires recharging.
THINGS TO BEAR IN MIND WHEN USING THE PRODUCT
Protect the heating elements from sharp objects and metal – do not use the product if the surface is torn.
Do not use any spare parts or accessories that are not meant for the device.
Do not repair, open up or change parts yourself.
Keep the product sufficiently far from heating devices in the room.
Do not throw or drop the device.
Keep the product out of the reach of children and pets.
After use, the product can be cleaned with universal non-corrosive cleaning agent and a moist towel.
The use of blood-thinning medication does not prevent the use of the product.
Do not allow the product to come into contact with water.
MAINTENANCE AND STORAGE
Do not clean with strong or corrosive cleaning agent, petrol, thinner, etc.
If you do not use the product for a long time, store it in a dry place protected from heat and do not allow it to get dusty.
Never leave the product outside in the rain, in direct sunlight or another light source or exposed to UV radiation.
No not keep the product too near to an open fire, fireplace or heating equipment and ensure that the room is well ventilated.
Do not immediately start to use the product, if the ambient temperature has rapidly changed “dampness/cold/frost”.
RECOMMENDATIONS FOR USE
Before using the product, the following matters should be taken into account – if you are sick, unsure of your state of health or are taking medication, discuss with your doctor about using the product. If the user has been fitted with a cardiac pacemaker, metal plates, prosthetic joints or other surgical implants such as silicon, he/she should always consult a doctor about such deep heat treatment. In the following cases, the use of the product is not recommended: acute disability, severe infection, poor blood circulation, heart disease, blood circulation disorders, blood clotting disorders, large scars, tactile disorders, tumours, problems with awareness or communication, which might prevent the user from telling about discomfort or pain caused by the use of the product. Pregnant women must not use the product.
FIR65° Heating Elements | 2 years.
Battery and battery charger | 6 months.